(201) 891-3010 Phone

(201) 891-7901 Fax

Hours 8:30am - 5:00pm Mon -Fri

The Buddvac Company

445 West Main Street

Wyckoff New Jersey

Home    Benefits   FAQ    Layout/Design   How to Order   Order Do It Yourself Systems    Order Parts and Attachments

MAKE YOUR HOME A HEALTHIER PLACE

DESIGN YOUR OWN LAYOUT

ALL YOU NEED is a 30 foot cord or rope to represent the 30 foot hose.  The hose, itself is 30 feet long, not including the metal ends and the wands.

• Pick tentative inlet locations which are accessible and which will not find themselves behind furniture or cabinets.  Try to locate inlets in halls and next to a door or opening...not in the middle of a wall.

• Have someone hold one end of the cord at the inlet location.  Move around to see if you can reach all corners.  Bear in mind that there may be tables, beds, cabinets, and other obstructions at some future time.

• After you have picked locations, check to be sure that there are no beams, pipes, or ducts to prevent you from piping to the proposed location.

• You can pipe upward and downward from an inlet location.  In two story homes or ranch houses, it is common to pipe inlets up to the attic.  You connect together all inlets in the attic and go down to the basement or garage with one pipe.

• You can expose pipes in a closet or a cabinet.

• Inlets are available for flush mounting in a sheetrocked wall and for surface mounting on columns or masonry.  Inlets are available in white, ivory and chocolate brown.

• Each inlet has switching built in to turn the motor on when the hose is plugged in.  Some operate by raising and lowering the door.  Others turn on when the hose is plugged in.

• It's a good idea to locate a 110 volt electrical outlet near each vacuum inlet just in case you decide to get an electrically powered rotating brush in the future.